Phoenix Contact 2403160, Руководство пользователя

Страница: 49 / 76

Software for configuring the Inline controller
107144_en_01 PHOENIX CONTACT
49 / 74
3.5 Integration with the Niagara Framework
®
Communication protocols The Niagara Framework
®
contains many communication protocols, which are also auto-
matically available in the Inline controller:
– BACnet IP
– BACnet MS/TP (only on COM1 and COM2)
– LonWorks IP852
– LonMark TP/FT-10 (ILC 2050 BI-L only)
– Modbus/TCP
– Modbus/RTU, M-Bus
– KNX/IP
– SNMP
– oBIX
– ...
You can integrate and link data points from different sources via the communication proto-
cols. In addition Niagara contains comprehensive processing and system functions such as
trend log, alarming, time switch, web visualization, report generators, interfaces to email,
SMS, databases, etc. Engineering is carried out with the Niagara Workbench.
3.5.1 Local I/O access
The components of the “SysMikScaIo” kit allow you to access the Inline terminals. Here, the
Niagara Driver Framework
®
“Network – Device – Point” approach is applied consistently:
“SysMikScaNetwork – terminals – data points (I/O channels)”.
In the “Driver Manager“, standard view of “Station, Config, Drivers”, a “SysmikScaIoNet-
work” is created via “New”.
“N Device Manager” In “N Device Manager”, the standard view of the “SysmikScaIoNetwork”, you can read in the
connected Inline terminals via “Discover”. Use “Add” to add the discovered Inline terminals
into the application.
Figure 3-13 “N Device Manager” in the “SysMikScaIoNetwork”