GB15
WelcomeHive Pro Outdoor4 - Outdoor8 / V4
3. Wiring
In order to avoid the risk of interference and malfunction, do not pass the wire for your
videophone through the same sheath as the electrical wires.
Note
:
Do not under any circumstances double wires to increase the wire size.
Notes:
To check that the product is not faulty, it is recommended that you make a
connection over a short distance (3 m of wire). If symptoms are identical, there is a product
fault. Otherwise check the installation and wire used.
a. Connecting the videophone (monitor, intercom panel and camera, see fig. 1, fig. 2 or fig. 3)
Wires to use: 2 wires 1 mm
2
minimum or 2 wires 1.5 mm
2
.
- Ensure proper connection of the wires, following one of the wiring diagrams according to
the desired configuration.
- Be sure to refer to the labelling on the back of the monitor and the back of the intercom
panel.
b. Connecting a strike plate (or electric lock) or an automated gate
To connect your strike plate or gate to the Philips WelcomeHive Pro intercom panel, please
refer to the connections below:
BUS (DS)
PL
S+
S-
1 2 3
Wiring with external power supply
Power supply
*Exit but-
ton
*Optional exit button
Remove the
jumper
BUS (DS)
PL
S+
S-
1 2 3
Wiring without external power sup-
ply
Max 12V – 250mA
Jumper
in posi-
tions
1 and 2
*Exit
button
*Optional exit button