Installation of the PIR
1
Remove the fixation-screw (1) and open the housing by releasing the
locking latch (2). Both are located at the bottom of the unit.
2
Remove the circuit board by loosening the fixation-screw (
1
).
Warning:
Never touch the face of the PYRO sensor (refer to lay out drawing
next page).
3
Knock out the desired mounting holes (1) and wiring holes (2) in the
bottom plate.
4
Thread the wires through the knocked out wiring hole(s).
5
Fasten the bottom plate with two screws, using the mounting holes.
6
Fit the circuit board.
CL 76610006_002.AI
3
1
2
CL 76610006_003.AI
1
1
2
g
8
