Philips VARILITE VL1100 LED Luminaire Скачать руководство пользователя страница 6

Страница: 6 / 87

VARI

❋

LITE

- VL1100 LED

AND

VL1100 LED HP U

SER

’

ANUAL

13 June 2017

02.1602.0002

Compliance and Safety Notices

Compliance
Safety Standards

We, Philips Entertainment Lighting, 10911 Petal Street, Dallas, Texas 75238 declare under our

responsibility for the products contained herein are in conformity with the essential requirements of

the following European Directives and Safety standards for United States and Canada.

EN 60589-2-17:1989+A2:1991 used in conjunction with 60598-1:2008/A11:2009
UL 1573 Issue: 2003/05/29 Ed: 4 Rev: 2016/12/22
CSA C22.2#166:2015 Ed.2

EMC Standards

This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when this equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with Vari-Lite system, service, and safety guidelines, may cause harmful interference to radio

communications.

FCC 47CFR 15:2016
CENELEC EN 55015:2006/12/01
CES-005:2007/02/01

Safety Notice

It is extremely important to read ALL safety information and instructions provided in this manual and

any accompanying documentation before installing and operating the products described herein. Heed

all cautions and warnings during installation and use of this product.

Safety symbols used throughout this manual are as follows:

GENERAL INFORMATION PERTAINING TO PROTECTION AGAINST ELECTRICAL SHOCK,

FIRE, EXPOSURE TO EXCESSIVE UV RADIATION, AND INJURY TO PERSONS CAN BE

FOUND BELOW.

WARNING:
INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST FIRE

1. VARI

❋

LITE luminaires have been designed for use with specific lamp types. The VL1100 LED

Luminaire requires a certain type of lamp (see

“Replacement Items/Accessories” on page 8

for all

lamp types). Installing another type or unapproved lamp may be hazardous.

2. Luminaires may be mounted on any type of surface as long as mounting instructions are followed.

See instructions detailed in this manual.

CAUTION advising of potential damage to product.

WARNING advising of potential injury or death to persons.

Содержание VARILITE VL1100 LED Luminaire
























































































Результаты поиска

Содержание VARILITE VL1100 LED Luminaire

Отзывы:

Похожие инструкции для VARILITE VL1100 LED Luminaire

Бренды по названию

Популярные бренды

Philips VARILITE VL1100 LED Luminaire, Руководство пользователя

Результаты поиска

Содержание VARILITE VL1100 LED Luminaire

Отзывы:

Похожие инструкции для VARILITE VL1100 LED Luminaire

Бренды по названию

Популярные бренды