Philips VARILITE VL1100 LED Luminaire Скачать руководство пользователя страница 37

Страница: 37 / 87

NSTALLATION

: P

OWERING

02.1602.0002

13 June 2017

Standard Power Up Procedure

Use this procedure when powering up a luminaire that has already been configured. (Refer to

“Power-

Up and Configuration Overview” on page 20

Note:

Refer to

Chapter 4:

“Menu System” on page 51

for detailed instructions on menu functions.

CAUTION:

Before applying power, be sure the luminaire is hung or positioned so that the head and

yoke can move freely without restriction.

To power up luminaire:

Step 1. At each luminaire, apply power by switching on power source. Luminaire will display

Starting

for 10-15 seconds, and then automatically step through the following procedure

Power Up and Configuration Procedure

Use this procedure when powering up a luminaire that has not been previously configured. (Refer to

“Power-Up and Configuration Overview” on page 20

Note:

Refer to

Chapter 4:

“Menu System” on page 51

for detailed instructions on menu functions.

CAUTION:

Before applying power, be sure the luminaire is hung or positioned so that the head and

yoke can move freely without restriction.

To configure luminaire at power up:

Step 1. At each luminaire, apply power by switching on power source.
Step 2. For unconfigured luminaires, menu will display

LampType

. Press [Enter] to move to next

level.

Step 3. Press [Up]/[Down] to toggle options. From

LampType

menu choose either

LED

by pressing [Enter].

Note:

LED

is selected, the menu system will update to include the Dimmer, DMX, and Manual

commands. (Dimmer will be added even if no dimmer is present.)

Step 4. Press [Up]/[Down] to select

Shutter?.

Press [Enter] to move to next level.

Step 5. Press [Up]/[Down] to toggle options. Choose either

Yes

by pressing [Enter].

Note:

If the luminaire is configured NOT to have the shutter system, the menu will automatically

update to include the beam-size iris assembly (even if one is not present), DMX, and Manual
commands.

Содержание VARILITE VL1100 LED Luminaire
























































































Результаты поиска

Содержание VARILITE VL1100 LED Luminaire

Отзывы:

Похожие инструкции для VARILITE VL1100 LED Luminaire

Бренды по названию

Популярные бренды

Philips VARILITE VL1100 LED Luminaire, Руководство пользователя

Результаты поиска

Содержание VARILITE VL1100 LED Luminaire

Отзывы:

Похожие инструкции для VARILITE VL1100 LED Luminaire

Бренды по названию

Популярные бренды