Philips UrbanSpark Скачать руководство пользователя страница 12

Maintenance

Panel :-

1. Normally you don't need to clean the panel frequently, it depends on the local 
environment.
2. In heavy dust area, it is required to clean the solar module regularly with a damp towel to 
guarantee optimum performance of the solar panel.
3. Do not use any type of solvent for cleaning and be careful not to put too much pressure 
on the module while cleaning.
4. You Should clean small ads regular.
5. You should trim the trees and branches which cover the PV panel regular.

Battery:-

Battery normally does not need any maintenance within the warranty. If any abnormal 
symptom or special requirement, following tests can be taken: -
1. Check whether there is some loose connection.
2. Measure and record ambient temperature in the pole.
3. Check the battery if it has deformation.

Battery Storage:-

The battery should be stored in clean and dry environment.
Storage time: battery is ex-work in fully charged, storage time should be limited. For 
ensuring battery performance, do not exceed storage time as following definition: 

Under -20

~25

, six months.

Under -20

~35

, three months.

Under -20

~45

, one month.

Warning

1. The recycle of the used battery should strictly follow the local laws and regulations. It is 
forbidden to handle the battery as normal garbage for disposal.
2. Do not open, short circuit, or mutilate batteries as injury may occur.
3. Do not put the battery into a pool.
4. Never move battery by pulling the cables of the battery.
5. The installation is highly suggested during the day. 
6. Only be charged with authorized charger by Signify.
7. Handle the panel pole and battery with great care during the installation and 
transportation.
8. Always

 

keep sparks, flames and smoking materials away from the battery.

9. In case of fire: To extinguish a fire of a battery, use CO2, foam, or dry chemical 
extinguishing media. 

Do NOT 

discharge the extinguisher directly onto the battery. The 

resulting thermal shock may cause cracking of the battery case/cover.

Important

If you have any question concerning safety when working with the battery operated solar 
system, contact your local Signify sales/service representative.

Maintenance

12

Содержание UrbanSpark














Отзывы: