Philips SOPHO C933, Руководство пользователя

Страница: 9 / 50

7
Charge
Display
Battery
Capacity Icon
Charge
Warning
Handset
Registration
The charge status of the batteries is indicated by
¡
on the
display. This means:
¡
batteries fully charged (80 – 100 %)
“
batteries 60 – 80 %
¶
batteries 40 – 60 %
¢
batteries 20 – 40 %
≠
batteries 0 – 20 %
≠
(frame flashes) batteries are empty: alert tone has been
given.
When batteries are replaced, no icon will be displayed before
a complete charge cycle has been completed, except when
almost empty batteries are inserted in the phone, then the
icon will be shown immediately.
When the battery capacity icon is displayed the indication is
reliable.
If the charged batteries are inserted, the batteries can be-
come hot during the first charge cycle, and if the fully char-
ged batteries are removed from the phone and inserted
again, the batteries can become overcharged.
When the handset is placed in the charger, ”Charging” is
shown on the display and the LED light ring lights steady
green when charging and when fully charged, there is no light
indication.
When the batteries’ capacity is almost exhausted, an acou-
stic warning is given in the form of 3 short ”beep” signals.
Approximately 10 minutes of standby time is left.
5 Initial Setup and Operation
The handset can be operated on up to 10 different DECT
systems. To do so, it has to be registered to each DECT
system.
Register the handset on the DECT system as described in
”Menu: System”.