Philips SOPHO C933, Руководство пользователя

Страница: 33 / 50

31
19 Menu: System
The handset can be operated with a maximum of 10 DECT
systems. Before you can make a call via the DECT system,
the handset has to be registered to the respective system. A
system ID and registration code may be necessary for the
registration process. Ask the respective system administrator
for the valid registration code. When the handset is not yet
subscribed to the system the display is showing ”No sub-
scription”.
All settings in this chapter are started by pressing the softkeys:
Menu
≤/≥
OK
Then select…
OK Options
≤/≥
New
/
OK
Z
PARK
OK
Z
PIN (Authentication code)
OK
Z
System name
OK
Z
Local phone number
OK
The following entries must be made when logging on:
: a system ID should only be entered if you are at a
location where two DECT systems overlap. If only one DECT
system is available, then just press
OK
.
: this code is used to register the handset
(authentication code). The DECT System supplies this code.
: give the name of the DECT system to
which you are registering. This will be shown on the idle
display. For information concerning the entry of characters,
refer to ”Entering Characters / Names”.
: the phone number, assigned to your
DECT handset can be entered here (ask your system admini-
strator for the phone number).
OK
≤/≥
select a System
Options
OK
If the handset has been registered to several DECT systems,
then you can select which one the handset is to use. Select
the system via the arrow keys before confirming ”
Select”
. By
choosing
Options
, the function automatic search
is disabled. The selected system is shown in the idle display.
Select
Select
Subscription
Enter Local Number
Enter System Name
Enter PIN
PARK
Subscription
System
Registration
Code
Registering
the Handset
to the DECT
System
Selecting
the DECT
System