Philips Sonicare DiamondClean HX9316/08, Руководство пользователя

Страница: 17 / 54

English 17
Observe basic safety precautions when you follow
the procedure outlined below. Be sure to protect
your eyes, hands, fingers, and the surface on
which you work.
1 To deplete the rechargeable battery of any
charge, remove the handle from the charger,
turn on the Philips Sonicare and let it run until it
stops. Repeat this step until you can no longer
turn on the Philips Sonicare.
2 Remove and discard the brush head. Cover the
entire handle with a towel or cloth.
3 Hold the top of the handle with one hand and
strike the handle housing 0.5 inch above the
bottom end. Strike firmly with a hammer on all
4 sides to eject the end cap.
Note: You may have to hit on the end several
times to break the internal snap connections.
4 Remove the end cap from the toothbrush
handle. If the end cap does not release easily
from the housing, repeat step 3 until the end
cap is released.
5 Holding the handle upside down, press the
shaft down on a hard surface. If the internal
components do not easily release from
the housing, repeat step 3 until the internal
components are released.
1
2
4235_021_1519_1_Booklet_Lux_A6_v1.indd 17 03/05/16 16:02