English
14
Easy-start
The Easy-start feature gently increases the power
over the first 14 brushings to help you get used
to the brushing with the Philips Sonicare.
The
Easy-start feature only works in Clean and White
modes. This Philips Sonicare model comes with
the Easy-start feature activated.
Activating or deactivating the Easy-start
feature
1 Place the handle in the plugged-in charger.
To activate Easy-start:
Press and hold the power on/off for 2 seconds.
You hear 2 beeps to indicate that the Easy-start
feature has been activated.
To deactivate Easy-start:
Press and hold the power on/off for 2 seconds.
You hear 1 beep to indicate that the Easy-start
feature has been deactivated.
Note: Using the Easy-start feature beyond the
initial ramp-up period is not recommended and
reduces Philips Sonicare effectiveness in removing
plaque.
Note: Each of the first 14 brushings must be at least
1 minute in length to properly move through the
Easy-start ramp-up cycle.
Traveling with your Philips Sonicare
Charging via wall outlet
1 Place the handle in the charging travel case.
2 Plug the USB cord into the wall adapter
provided and plug into an electrical outlet.
-
The charge indicator flashes green until
fully charged.
4235_021_1519_1_Booklet_Lux_A6_v1.indd 14
03/05/16 16:02
Содержание Sonicare DiamondClean HX9316/08
Страница 1: ...DiamondClean DiamondClean 35_021_1519_1_Booklet_Lux_A6_v1 indd 1 03 05 16 16 02 ...
Страница 2: ...35_021_1519_1_Booklet_Lux_A6_v1 indd 2 03 05 16 16 02 ...
Страница 3: ...2 1 3 4 5 6 7 8 9 10 12 11 1 35_021_1519_1_Booklet_Lux_A6_v1 indd 3 03 05 16 16 02 ...
Страница 4: ...1 35_021_1519_1_Booklet_Lux_A6_v1 indd 4 03 05 16 16 02 ...