Philips SL BAR 620 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 48

background image

Installation & User’s Manual

SL BAR 620 RGBW LED Luminaire

1 6

OPERATION AND PROGRAMMING

Sh wline

Settings/General

Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the different general
fixture settings. When finished, press the Check button to exit the menu level. The adjustable parameters are
described in Table 9.

Settings/Factory Default

Factory default menu settings can be recalled through this menu option. You can select if you wish to overwrite the
user edited preset and chases.

Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the different settings.
When finished, press the Check button to exit the menu level. The adjustable parameters are described in Table 10.

Settings/DMX

DMX configuration options are available in the DMX menu.

Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the fixture's DMX
settings. When finished, press the Check button to exit the menu level. The adjustable parameters are described in
Table 11.

Table 9: General Level Parameters

Parameter

Description

Power-Up

Select the action of the fixture when the unit is powered ON. You can select from Off, Last
Set, Color filters, presets, and chases.

Mode

Select either Master/Slave (see

Master / Slave Operational Mode

for more information).

Dim Response

Select Normal, Incandescent, or Reduced dimming response.

•

Normal: Fixture LEDs dim with a normal response.

•

Incandescent: Fixture LED’s dim with an incandescent emulation response. The
response to dimming commands will be slightly delayed at lower intensities.

•

Reduced: The response to dimming commands will be calculated with a smaller algo-
rithm to provide emulation with other manufacturer's products.

Dimming Curve

Select one of four dimming curve choices (see

Dimming Curve Selection

for more

information).

Calibration

Toggle Harmonize Color Calibration on or off (see

Harmonize Color Calibration

for more

information).

Fan Control

Select Auto of Off fan operation (see

DMX CONTROL

for more information).

Table 10: Factory Default Parameters

Parameter

Description

Protected

•

No - all menu items are able to be restored to factory defaults.

•

Preset & Chase - user edited Presets and Chases are not able to be restored to fac-
tory defaults.

Load Factory

•

No - no action.

•

Yes - restore to factory default menu settings.

Table 11: DMX Setting Parameters

Parameter

Description

DMX Enable

•

Enable - Fixture will respond to DMX commands/signals.

•

Disable - Fixture will ignore DMX commands/signals.

Address

Assigns the fixture’s DMX start address.

Map

Selects the DMX map for the fixture to use (see

DMX CONTROL

section for more

information).

When no DMX

Selects the action of the fixture when the unit is powered ON and not receiving DMX.

•

Off - Turn off all LED output.

•

Last Action - restore the last menu action.

•

Power-up - follow the power-up value in the settings menu.

•

Hold - continue with the last DMX values received.

LED Group

Select the number of LED groups to control via DMX (see

DMX CONTROL

section for

more information)

«
...
16
17
18
19
20
...
»

Содержание SL BAR 620

















































Отзывы:

Нет отзывов

Похожие инструкции для SL BAR 620

Бренд: Stanley Страницы: 2

LED-FLA1005IR-Set

Бренд: Ledino Страницы: 4

Бренд: Jesco Страницы: 3

Бренд: Golight Страницы: 2

CL1B-SS-PM-1227

Бренд: Larson Electronics Страницы: 3

Бренд: Draper Страницы: 16

Metrex Egress METEC Series

Бренд: kenall Страницы: 3

Бренд: Dialighting Страницы: 6

Бренд: DTS Страницы: 36

Бренд: Ceotis Страницы: 2

Бренд: LEDLITE Страницы: 2

Бренд: Schulte Страницы: 4

Warm White STRIP (2700K)

Бренд: Tupex Electric Страницы: 2

Бренд: Lightolier Страницы: 2

Бренд: Baxi Страницы: 44

RCL-600A - SCHEMA REV A

Бренд: ACR Electronics Страницы: 1

Бренд: ACR Electronics Страницы: 20

Бренд: ACR Electronics Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды