SL STRIP 10IP
IMPORTANT INFORMATION
IMPORTANT INFORMATION
When using electrical equipment, basic safety precautions should always be followed including the following:
a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b. Do not mount near gas or electric heaters.
c. Equipment should be mounted in locations and at heights where it will not readily be subjected to
tampering by unauthorized personnel.
d. The use of accessory equipment not recommended by the manufacturer may cause an unsafe
condition.
e. Do not use this equipment for other than intended use.
f. Refer service to qualified personnel.
SAVE THESE INSTRUCTIONS
.
WARNING
: You must have access to a main circuit breaker or other power disconnect device before
installing any wiring. Be sure that power is disconnected by removing fuses or turning the main circuit
breaker off before installation. Installing the device with power on may expose you to dangerous
voltages and damage the device. A qualified electrician must perform this installation.
WARNING
: Refer to national Electrical Code and local codes for cable specifications. Failure to use
proper cable can result in damage to equipment or danger to personnel.
WARNING
: T
his equipment is intended for installation in accordance with the National Electric Code
and local regulations. It is also intended for installation in indoor applications only. Before any
electrical work is performed, disconnect power at the circuit breaker or remove the fuse to avoid
shock or damage to the control. It is recommended that a qualified electrician perform this installation.
Warnings and Notices
