PROGRAM UPDATE
Programs of this device can be updated via the RDM interface with proper tool named SC-NODE
and RDM Program Tool. Connect the SL STRIP 10IP to the output terminal of the SC-NODE then
connect the SC-NODE to the PC, run the TCP/IP setting, see the following figures for details.
After the TCP/IP is set, run the RDM_Program_Tool.exe software, the tool will search RDM devices
automatically for the first time, user may also search devices via ArtTod Control command.
When the software searched a RDM device, the RDM UID will be listed in the “RDM UID Lists”. Select the
listing RDM UID, then press “Update Selected Device” command to upload the desired updating program,
press “open”command to start updating. After finishing updating, the software will start to search device once
again, and showing “update successful!”, means program updating completed.
SL STRIP 10IP
PROGRAM UPDATE
12
