SL STRIP 10IP
OPERATION MODES
5
OPERATION MODES
The “SL STRIP 10IP” has four different operation modes. It can be used as a 01 pixel, 02 pixel, 5 pixel,
10 pixel channel DMX dimmer. Please follow illustrations below to operate the unit in your desired mode.
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow
you set your unit dimmer function as a 01 pixel, 02 pixel, 05 pixel,10 pixel channel DMX dimmer and DMX
address.
DMX Mode
Mode
Parameter
Parameter Value
Function
DMX
Chase
Manual
Calibration
Address
Channel
DMX Fade
Program
Speed
Dimmer
Fade
R
G
B
W
001-512
8 Bit:1/2/5/10 pixel 16 Bit:1/2/5/10 pixel
OFF/ON
01-10
01-99
000-255
000-100
000-255
000-255
000-255
000-255
To set the initial DMX receiving address
To set the DMX Control Mode
To set the status of the fixture when there is no DMX input
To set the output intensity of the red
To set the output intensity of the green
To set the output intensity of the blue
Can be set as ON or OFF
To set the output intensity of the cool white
To select a built-in program
To set the speed level of the built-in Program
To set the intensity
To set the speed of the Fadetime(percentage)
SL STRIP 10IP DMX Mapping (RGBW 16 Bit Mode)
Red _ 9-10 - High Byte
Blue _ 9-10 - High Byte
Green _ 9-10 - High Byte
White _ 9-10 - High Byte
Red _ 9-10 - Low Byte
Blue _ 9-10 - Low Byte
Green _ 9-10 - Low Byte
White _ 9-10 - Low Byte
