Charging in the charger
1
Insert the small plug into the charger.
2
Unfold the charger (‘click’).
3
Put the adapter in the wall socket.
4
Put the shaver in the charger (1) and press it
backwards until it locks into place (2).
,
The display shows that the shaver is charging
(see section ‘Charging’ in chapter ‘The display’).
Charging in the Jet Clean System
(RQ1175A/26 only)
1
Put the small plug in the Jet Clean System.
2
Put the adapter in the wall socket.
3
Hold the shaver upside down above the holder
with the back of the shaver pointing towards
the holder.
4
Place the shaver body in the holder behind the
two clips (1) and press it down until it locks
into place (2).
1
2
ENGLISH
1
2
37
