8
1.2 Important
1.2.1 Danger
•
Water and electricity are a dangerous
combination! Do not charge this device in wet
surroundings (e.g. near a filled bath, a running
shower or near a filled swimming pool).
•
Keep the device and the adapter dry.
•
never rinse the device under the tap.
The device is neither waterproof nor
water-resistant.
1.2.2 Warning
•
This device, laser performance gel and laser
aftercare complex are not intended for use
by persons younger than 18
and persons with
reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning use of the device by a person
responsible for their safety.
•
Children should be supervised to ensure that
they do not play with the device.
•
Always remove the application tip from the
device immediately after use, clean and store
it in its appropriate place in the pouch. Please
make sure to store the pouch with the device
out of the reach of children in a dry and dust-
free environment.
•
Only use the adapter supplied to charge
the device.
•
never cover the device and the adapter
during charging.
•
never cover or block the ventilation openings
of the device.
1 Important safety
information
Before you start using Philips RéAura, read
this user manual carefully, watch the enclosed
instructional DVD and set your objectives on
www. philips.co.uk/myreaura. If you have any
questions, you can contact the Philips skincare
expert team.
1.1 Safety features
1.1.1 Child lock
The device does not work without the application
tip to prevent unintended use by children. Store
the application tip separate from the device in the
pouch and keep the pouch in a safe place out of
the reach of children.
1.1.2 Eye protection
To protect the eyes, the device only emits laser
pulses if the application tip is fully in contact with
the skin and the device is moved over the skin.
1.1.3 Overtreatment protection
If the device detects that more than the
recommended maximum number of doses have
been applied within 24 hours, the status indicator
flashes orange for 30 seconds and the device
switches off automatically. The device remains
locked for 24 hours to prevent further use.
1.1.4 Thermal protection
If the built-in temperature sensor measures a too
high or too low temperature inside the device, it
switches the laser off. The status indicator lights
up red continuously. The fan inside the device
continues to work to help cool down the device
when it is too hot. When the status indicator
lights up green, the device is ready for use again.
If the device does not cool down enough within
5 minutes, it switches off completely.
