- Clean the inside and outside of the shaving guard
with the brush.
6
Put the shaving heads back into the shaving
unit.
Make sure that the projections of the shaving
heads fit exactly into the recesses.
7
Put the retaining frame back into the shaving
unit and turn the lock clockwise.
8
Insert the lug of the shaving unit into the slot
in the top of the shaver (1). Then close the
shaving unit (2).
Note: If the shaving unit does not close smoothly, check
if you have inserted the shaving heads properly and if
the retaining frame is locked.
storage
- Put the protection cap on the shaver every time
you have used it, to prevent damage.
B
A
English
26
PT732_EN_A6_CS3.indd 26
13.5.24 2:06:04 PM
