Philips PR702, Руководство пользователя

Страница: 8 / 15

7 EN
4 Set alarm timer
Set alarm
You can set two alarms to ring at different time.
Note
• Make sure that you have set the clock correctly.
• You can only set the alarm in standby mode.
1
In standby mode
，
press and hold ALARM1
or ALARM2 for more than 2 seconds to
activate alarm setting mode, clock digits
buzz icon ( ) and alarm icon ( or )
on the display will flash.
2
P ress the - or + b utton to adjust the hour.
P ress ALARM1 or ALARM2 to confirm and
the minutes digits on the display will flash.
3
Press the - or + b utton to adjust the minutes.
P ress ALARM1 or ALARM2 to confirm
4
Press ALARM1 or ALARM2 repeatedly
to select alarm source:
• Buzzer ( ) on
•
Bluetooth music ( ) on
•
Cancel alarm
• To stop the ringing alarm, press the
corresponding ALARM1/ALARM2.
The alarm repeats itself in
subsequent days.
Tip
•
The alarm volume is not adjustable, but it will go up
gradually to gently wake you up.
•
If the alarm if set to Bluetooth music but no Bluetooth
device is detected, the alarm will default to buzzer.
Activate/deactivate alarm timer
• In standby mode, press ALARM1 or ALARM2
to view the current alarm settings.
• Press ALARM1 or ALARM2 again to activate
or deactivate the alarm timer.
or appears if the alarm timer is on
and disappears if it is off.
• To stop the alarm, press the
corresponding ALARM1 or
ALARM2 buttons.
Snooze the alarm
When the alarm goes off, press SNOOZE.
The alarm snoozes and repeats
ringing nine minutes later.