Philips PR702, Руководство пользователя

Страница: 6 / 15

EN 5
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
•
Risk of product damage! Make sure that
the power voltage corresponds to the
voltage printed on the back or underside
of the clock radio
.
•
Risk of electric shock! When you unplug
the AC adapter, always pull the plug from
the socket. Never pull the cord.
•
Risk of explosion! Keep the battery away
from heat, sunshine or fire. Never discard
battery in fire.
•
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
Set clock
1
In standby mode, press and hold SET TIME
for more than 2 seconds to activate clock
setting. The time format 24H on the display
will flash.
2
3
Connect the power adapter to the wall outlet.
Install battery
You can only use AC power as power supply.
The AAA battery can only back up clock and
alarm settings. When power is disconnected,
the display backlight is off.
AAA
Replace batteries when the Low battery
indicator is on
•
The battery contains chemical substances, so it
should be disposed of properly.
Caution
According to the instructions in the correct
polarity (+ / -) insert section 1.5V x 2 AAA
batteries (not provided)
Press the - or + button repeatedly to select
24 hour (default) or 12 hour clock display
format.
press SET TIME to confirm and the hour
digits on the display will flash