Additional Onis 200 handset
7
English
Using the handset with an ONIS 200
base station
The additional
HANDSET
functions in the same manner as the handset which
comes with your
Onis 200
or
Onis Vox 200 BASE STATION
.
With this multi-handset setup you can now:
- make conference calls,
- transfer calls,
- make an external call with two other
HANDSETS
in an intercom mode (if you
have 3 or more
HANDSETS
). See instructions for more information.
- use the “babysit” function.
Using the handset with another GAP
standard base station
The GAP standard guarantees minimum operating performance for all handsets and
base stations, irrespective of their make.
Your
HANDSET
conforms with this standard.
In order to get the most out of your
HANDSET
, we recommend you read both
these and the manufacturer’s instructions.
Charger wall-mounting
Make two holes in the wall, 65mm apart vertically and insert screws.
Mount the base using the plastic attachment and pull down.
Battery performance
The telephone will work for approximately one week when the
HANDSET
is away
from the
BASE STATION
in idle mode and around 8 hours when in use.
• During a call, beeps will provide a warning when only a few seconds of battery life
remain.
Communication will be cut off automatically when after this time.
2
1
When your HANDSET is used with a
different make of base station, line
connection, call reception and dialling
functions are guaranteed.
The
icon indicates a charge level
below 5% (no bar).You should now charge
the HANDSET