15
4
Repeat the previous steps to program
other stations.
Note
To overwrite a programmed station, store
•
another station in its place.
Tune to a preset radio station
1
Press / to select a preset number
that you want.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to a RDS station, a RDS
icon and the station name are displayed.
1
Tune to a RDS station.
2
Press repeatedly to scroll through the
following information (if available):
Station name
»
Program type such as
»
[NEWS]
(news),
[SPORT]
(sport),
[POP M]
(pop music)...
RDS clock
»
Frequency
»
Synchronize clock with RDS
You can synchronize time shown on the unit
with that on the RDS station.
1
Tune to a RDS radio station that
transmits time signals.
2
Press
RDS
for over 2 seconds.
»
[CT SYNC]
is displayed and the unit
reads RDS time automatically.
If no time signal is received,
»
[NO CT]
is displayed.
Note
The accuracy of the transmitted time depends
•
on the RDS station that transmits the time signal.
Note
•
[STEREO]
is default setting for tuner mode.
Tip
Under tuner mode, you can press
•
OK
repeatedly
to toggle between
[STEREO]
and
[MONO]
, and
the unit memorizes your setting even if you turn
off the unit or turn to other sources.
Program radio stations
automatically
Note
You can program a maximum of 20 preset
•
radio stations.
1
In tuner mode, press and hold
PROGRAM
for two seconds to activate
automatic program mode.
[AUTO] (auto) is displayed and begins
»
to blink.
The unit automatically stores radio
»
stations with sufficient signal strength.
The first programmed radio station
»
broadcasts automatically.
Program radio stations manually
Note
You can program a maximum of 20 preset
•
radio stations.
1
Tune to a radio station.
2
Press
PROGRAM
to activate
programming.
3
Press / to allocate a number from 1
to 20 to this radio station, then press
PROGRAM
to confirm.
The preset number and the frequency
»
of the preset station are displayed.
English
EN
