Philips MCD370, Быстрое руководство пользователя

Страница: 8 / 25

6
English
IMPORTANT!
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections have
been made.
– Never make or change any connections with
the power switched on.
– The type plate is located at the rear or bottom
of the system.
1. Connecting the speakers
Connect the speaker cables to the SPEAKERS terminals.
Right speaker to " R " and left speaker to " L ", red (marked)
wire to "
+
" and black (unmarked) wire to "
-
". Fully
insert the stripped portion of the speaker wire into the
terminal as shown.
1 2
Helpful Hints:
– Ensure that the speaker cables are correctly connected.
Improper connections may damage the system due to short-
circuit.
– For optimal sound performance, use the supplied speakers.
– Do not connect more than one speaker to any one pair of
+
/
-
speaker jacks.
– Do not connect speakers with an impedance lower than
the speakers supplied. Please refer to the SPECIFICATIONS
section of this manual.
2. Connecting antennas
MW Indoor Loop Antenna
Connect the supplied MW
(AM) loop antenna’s wires
to
MW jack. Place the
antenna on a shelf or attach
it to a stand or wall.
FM Indoor Antenna
Connect the supplied FM antenna to
the
FM (75
Ω
)
jack. Extend the FM
antenna and fix its ends to the wall.
For better FM stereo reception, connect an external FM
antenna using an 75 ohm coaxial cable (not supplied).
Helpful Hints:
– Adjust the position of the antennas for optimal reception.
– Position the antennas as far as possible from your TV, VCR
or other radiation source to prevent unwanted interference.
Connections
C
ONNECTIONS
ANTENNA
MW
FM
75
Ω
SCART OUT
VIDEO
OUT
S-VIDEO
OUT
SUBWOOFER
OUT
DIGITAL
OUT
AUX/TV
IN
LINE
OUT
L
R
SPEAKERS
(8
Ω
)
L R
+
–
+
–
AUDIO
OUT
S-VIDEO
IN
VIDEO IN
SCART IN
AUDIO
OUT
S-VIDEO
IN
VIDEO IN
SCART IN
1
2
3
AC MAINS
1 2
Power cord
Speaker
(left)
Speaker
(right)
FM Antenna
MW Antenna