Philips MCD370, Быстрое руководство пользователя

Страница: 21 / 25

19
English
Tuning to radio stations
1
Press STANDBY ON
y
to switch on the last selected
source.
2
Adjust SOURCE (or press TUNER on the remote) to
select TUNER mode.
3
Press TUNER again to select the desired band : FM or
MW.
4
Press and hold
S
or
T
until the frequency indication
starts to change, then release.
➜
The system automatically tunes to the next strong radio
station.
L R
●
To tune to a weak station, press
S
or
T
briefly and
repeatedly until an optimal reception is found.
5
Repeat step 4 if necessary until you find the desired radio
station.
Presetting radio stations
You can preset up to 40 stations regardless of the
reception.
1
Tune to your desired radio station (refer to “ Tuning to
radio stations ”).
2
Press
PROGRAM
.
➜
“ PROG ” icon appears.
3
Use the numeric keypad (0-9) to select the desired
preset number.
➜
If “ PROG ” icon goes off before you select the desired
preset number, press PROGRAM again.
PROG
L R
4
Press PROGRAM again to store the radio station.
●
Repeat steps 1–4 to store other radio stations.
Helpful Hints:
– During programming, if no key is pressed within five
seconds, the system will exit the programme mode
automatically.
Listening to preset radio
stations
●
In tuner mode, press
1
or
2
or use the numeric keypad
(0-9) to select the desired preset number.
➜
The preset number, radio frequency, and waveband are
displayed.
Radio Reception
R
ADIO
R
ECEPTION