13
English
AD905W Wireless System
The
AD905W
accessory gives you the option for wireless
speaker connection.
Please check you have all the supplied parts for your
AD905W
wireless set:
–
1 x
AD905WT
WIRELESS
TRANSMITTER
–
1 x
AD905WA
WIRELESS
RECEIVER
–
1 x 14V adapter
–
1 x table stand
1
Remove the PHILIPS cover from the
AD905WA
WIRELESS
RECEIVER
as shown in
Fig.
1
, to access the connection
terminal. Connect your rear speaker terminals with the
corresponding color terminals on the
AD905WA
WIRELESS
RECEIVER
2
Insert the table stand into the brackets as shown in
Fig.
2
.
3
Connect the
AD905WA
WIRELESS
RECEIVER
power cord
to your power supply.
4
Check / adjust the
AD905WA
WIRELESS
RECEIVER
OFF-
ON
switch to the
ON
position (see
Fig.
1
).
➜
The
AD905WA
WIRELESS
RECEIVER
power indicator
lights up green.
5
Connect the 14V power adapter to the
AD905WT
WIRELESS
TRANSMITTER
and power supply as shown in
Fig.
3
.
6
Make sure you position both the
AD905WT
WIRELESS
TRANSMITTER
and
AD905WA
WIRELESS
RECEIVER
at least
2 meters apart.
7
Connect and carefully match the
AD905WT
WIRELESS
TRANSMITTER
inputs to the corresponding surround
speaker jacks on your
LX3750W
DVD system.
➜
The
AD905WT
WIRELESS
TRANSMITTER
power
indicator lights up red.
8
Check and adjust the 4-channel toggle switch on the
AD905WT
WIRELESS
TRANSMITTER
and
AD905WA
WIRELESS
RECEIVER
(
CHANNEL SELECTOR
switch),
so that both units are using the same channel.
9
On your
LX3750W
DVD system, play an audio source
and activate the surround sound mode option. Adjust the
volume to reproduce surround sound in the rear speakers.
10
Extend the antenna vertically on both the
AD905WT
WIRELESS
TRANSMITTER
and
AD905WA
WIRELESS
RECEIVER
to improve reception. Check the antennas are
safely positioned without obstruction.
To ensure quality sound production and
transmission
●
Place both the
AD905WT
WIRELESS
TRANSMITTER
and
1
2
4
1
3
AD905WA
WIRELESS
RECEIVER
off the ground
(recommended minimum height of 30cm).
●
Avoid placing the
AD905WT
WIRELESS
TRANSMITTER
too
close to your DVD receiver, AC power adapter, TV or other
electrical equipment as it may cause electrical interference.
●
In case of sound distortion, please select another channel
for both the
AD905WA
WIRELESS
RECEIVER
and
AD905WT
WIRELESS
TRANSMITTER
.
The distortion could
be the result of interference caused by other equipment
using same frequency channel in your house or
neighbourhood.
Notes
–
After you switch off your DVD system, the
AD905WT
WIRELESS
TRANSMITTER
automatically enters standby mode and
the red power indicator eventually comes out. On receiving an
incoming audio signal from your DVD system again, the
AD905WT
WIRELESS
TRANSMITTER
automatically powers up.
–
When the
AD905WA
WIRELESS
RECEIVER
enters the Eco-
power standby mode, the power indicator lights up red.
Connections
C
ONNECTIONS
