background image

3

EN

Safety information

Equipment Approval Information

Your telephone equipment is approved for connection to the Public Switched Telephone

Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the

Technical Requirements for Telephone Terminal Equipment published by ACTA.

1.

Notification to the Local Telephone Company

On the bottom of this equipment is a label indicating, among other information, the US number

and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this

information to your telephone company.
The REN is useful in determining the number of devices you may connect to your telephone

line and still have all of these devices ring when your telephone number is called. In most (but

not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To

be certain of the number of devices you may connect to your line as determined by the REN,

you should contact your local telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must

comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant

telephone cord and modular plug is provided with this product. It is designed to be connected to a

compatible modular jack that is also compliant. See installation instructions for details.

Notes 

•  This equipment may not be used on coin service provided by the telephone company.
•  Party lines are subject to state tariffs, and therefore, you may not be able to use your own

telephone equipment if you are on a party line. Check with your local telephone company.

•  Notice must be given to the telephone company upon permanent disconnection of your

telephone from your line.

•  If your home has specially wired alarm equipment connected to the telephone line, ensure the

installation of this product does not disable your alarm equipment. If you have questions about

what will disable alarm equipment, consult your telephone company or a qualified installer.

US Number is located on the cabinet bottom.

REN Number is located on the cabinet bottom.

2.

Rights of the Telephone Company 

Should your equipment cause trouble on y our line which may harm the telephone network, the

telephone company shall, where practicable, notify you that temporary discontinuance of service

may be required. Where prior notice is not practicable and the circumstances warrant such

action, the telephone company may temporarily discontinue service immediately. In case of such

temporary discontinuance, the telephone company must: (1) promptly notify you of such

temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3)

inform you of your right to bring a complaint to the Commission pursuant to procedures set

forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment,

operations or procedures where such action is required in the operation of its business and not

inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or

performance of your telephone equipment, the telephone company must give you adequate

notice, in writing, to allow you to maintain uninterrupted service.

ID9370_extra_hs_IFU_EN_US.book  Page 3  Tuesday, February 27, 2007  7:00 PM

Содержание ID9370B/37































Отзывы: