10
EN
4
Clean the inside of the water tank
with a soft clean cloth.
5
Empty the water tank into a sink.
6
Put the humidification filter and the
filter support back into the water
tank.
Clean the humidification
filter
Clean the humidification filter every
week to keep it hygienic.
1
Take out the humidification filter
and the filter support from the
water tank (fig.
o
).
2
Remove the humidification filter
from the filter support (fig.
p
).
3
Soak the humidification filter in
cleansing agent (e.g diluted citric
acid solution) for one hour (fig.
q
).
Note
•
Please use mid or acid cleanser
(24g citric acid with 4L water).
4
Rinse the humidification filter
under a slowly running tap. Do not
squeeze or wring the filter when
cleaning (fig.
r
).
5
Let excess water drip off the
humidification filter.
6
Assemble the humidification filter
round the filter support (fig.
d
).
7
Put the humidification filter and the
filter support back into the water
tank (fig.
e
).
8
Put the upper unit back onto the
water tank (fig.
g
).
Note
•
Do not squeeze or wring the filter. This
might damage the filter and impact
humidification performance.
•
Do not dry the filter under direct
sunlight, unless it is assembled back
onto the filter support
6 Replacing the
humidification
filter
Replace the humidification filter every 6
months for optimal performance. If the
filter is in good condition, you could use
it for a longer period of time. Make sure
to replace the humidification filter at
least once a year.
Note
•
Use only Philips original humidification
filter
FY2401
.
•
Always unplug the humidifier before you
replace the humidification filter.
Tip
•
Register your product at
www.philips.com for further information
on how to replace your filter.
1
Take out the humidification filter
and the filter support from the
water tank (fig.
o
).
2
Remove the humidification filter
from the filter support. Discard the
used filter (fig.
s
).
3
Remove the packaging material from
the new humidification filter (fig.
c
).
4
Assemble the new humidification
filter around the filter support (fig.
d
).
5
Put the filter and the filter support
back into the water tank (fig.
e
).
6
Put the upper unit back onto the
water tank (fig.
g
).
Tip
•
You can easily find more information
about how to replace the filter in our
web page or by calling our Consumer
Care Center.
