Philips HTS5100B, Руководство пользователя

Страница: 8 / 56

EN 8
FUNCTIONAL OVERVIEW
* The unit can also be turned on by pressing these buttons.
1.
Q
(STANDBY-ON) button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord.)
2. Disc tray
• Place a disc when opening the disc tray.
3.
A
(OPEN/CLOSE) button*
• Press to open or close the disc tray.
4. Infrared sensor window
• Receive signals from your remote control so that you
can control the unit from a distance.
5. Display
• Refer to “Front Panel Display” on page 11.
6. VOLUME jog
• Rotate to adjust the volume.
7.
C
(STOP) button
• Press to stop playback.
8.
B
(PLAY) button*
• Press to start or resume playback.
9.
H
/
G
(PREV/NEXT) button
• Press to skip to the previous or next title/chapter/
track.
10. SOURCE button
• Press to select the relevant active source mode;
“DISC”, “AUX”, “FM”, “iPod” or “D-IN”.
The following jacks are under the flap at the right corner of
the front panel.
11. SD CARD slot
• Insert an SD Memory Card and play back the
contents in it.
12. iPod DOCK jack
• Use to connect to the iPod docking station.
1. AC Power Cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
shut down the unit.
2. AUDIO IN (AUX) jacks
• Use to connect to other device with audio out jacks
with an RCA audio cable.
3. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video
inputs with a component video cable.
4. FM ANT 75
Ω
jack
• Use to connect to an external FM wire antenna.
5. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
6. LAN Terminal
• Use to connect a telecommunications equipment
with LAN cable.
7. VIDEO OUT jack
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA video cable.
8. DIGITAL IN (OPTICAL) jack
• Use to connect to other device with digital audio
optical output jacks with a digital audio optical cable.
9. 5.1ch Audio Out jacks (SPEAKERS (6
Ω
))
• Use to connect to 5.1ch speakers.
Front Panel
VOLUME
PUSH
1 2 3* 5 6 7 8* 11 12
9
4 10
Rear Panel
6 5 4 3
7
2
9 8
1
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.