Philips HTS5100B/F7, Руководство по обслуживанию

Страница: 18 / 72

1-8-5 E1P00FW
CEC U-COM DOWNLOAD
PROCEDURE
* Install the Download Program
1. Create the Folder (PHILIPS) in below position.
C\Program Files\PHILIPS
2. Copy to the attached ZIP file (Flash
Programmer.zip) in this folder (PHILIPS) and
extract from here.
(T5CB5PQ folder and T5CC1 folder)
3. Click the T5CB5PQ.
4. Click the Flash Programmer.
5. You can find FlashProg.exe . This is the excution
file.
(If you don't set up the PORT, you will see the tab
below)
* Download the u-com
1. Prepare for the new soft program. Please
remember the save position.
2. Execute the FlashProg.exe , You can see in below
Pop-up window.
3. Select the [Setup] tab and click the [Setup File].
4. You can set up Setup File , Device , Object File
and Communication .
Setup File
Click the [Browse] button to select the Set up File.
Device
Object File
Click the [Browse] button to select the program.
“CB5_CEC_1119_1” to select the file.Type of file is
“iHEX Format(*.h16,*.h20)”.
(please select program of HTS5100B)
Communication
If you couldn’t program after setting up all
conditions, try again with another “Data Rate
value”. (You can download fester with “38400”)
5. Connect the PC (COM port) and update JIG of
HTS5100B with RS-232C cable.
6. Plug the HTS5100B Power Cord(stand-by mode).
C;\Program Files\PHILIPS\T5CB5PQ\Flash
Programmer\FlashProg.ini
SW14
SW13
SW12
SW11
This position is for HOST program download