Philips HTS5100B/F7, Руководство по обслуживанию

Страница: 14 / 72

1-8-1 E1P00FW
FIRMWARE RENEWAL MODE
DSP DOWNLOAD PROCEDURE
* Install the Download Program
1. Create the Folder (PHILIPS) in below position.
C\Program Files\PHILIPS
2. Copy to the attached ZIP file (Flash
Programmer.zip) in this folder (PHILIPS) and
extract from here.
(T5CB5PQ folder and T5CC1 folder)
3. There is a FlashProg.exe when the folder of
T5CC1 is opened. This is the excution file.
(If you don't set up the PORT, you will see the tab
below)
* Download the u-com
1. Prepare to new soft program. Please remember
the Save position.
2. Excute the FlashProg.exe , You can see in below
Pop-up window.
3. Select the [Setup] Tab and click the [Setup File].
4. You can set up Setup File , Device , Object File
and Communication .
Setup File
Click the [Browse] button to select the Setup File.
Device
Object File
Click the [Browse] button to select the program.
Please select DSP program of HTS5100B
(FUNAI_SF1.s24)
You can get 3 of DSP programs. You have to
downlaod sequence.
(FUNAI_SF1.s24
Æ
FUNAI_SF2.s24
Æ
FUNAI_SF3.s24)
Type of file is “Motorola S Format(*.s16,*.s24,
*.s32)”.
Communication
If you couldn’t program after setting up all
conditions, try again with another “Data Rate
value”. (You can download fester with “38400”)
C;\Program Files\PHILIPS\T5CC1\FlashProg.ini