Philips HTS5100B/F7, Руководство по обслуживанию

Страница: 16 / 72

1-8-3 E1P00FW
15. You can see the tab below.
Push this SW for disconnection.
(This key is for disconnection or reconnection, if it
has reconnected, please push again.)
16. After disconnection, please go back to “2. ~ 4.”
and set all conditions up with “FUNAI_SF2.s24”
and then realize “8. ~ 13.”.
17. Realize “14. ~ 16.” for “FUNAI_SF3.s24”.
18. Finish.
19. After downloading DSP program, You have to
download HOST program.
HOST U-COM DOWNLOAD
PROCEDURE
Install the Download Program
1. Create the Folder (PHILIPS) in below position.
C\Program Files\PHILIPS
2. Copy to the attached ZIP file (Flash
Programmer.zip) in this folder (PHILIPS) and
extract from here.
(T5CB5PQ folder and T5CC1 folder)
3. There is a FlashProg.exe when the folder of
T5CC1 is opened. This is the excution file.
(If you don't set up the PORT, you will see
bellowed tab)
* Download the u-com
1. Prepare for the new soft program. Please
remember the Save position.
2. Execute the FlashProg.exe . You can see in below
Pop-up window.
3. Select the [Setup] tab and click the [Setup File].
4. You can set up Setup File , Device , Object File
and Communication .
Setup File
Click the [Browse] button to select the Setup File.
C;\Program Files\PHILIPS\T5CC1\FlashProg.ini