Philips HTS5100B/F7, Руководство по обслуживанию

Страница: 15 / 72

1-8-2 E1P00FW
5. Connect the PC (COM port) and update JIG of
HTS5100B with RS-232C cable.
6. Plug the HTS5100B Power Cord(stand-by mode).
7. Push the RESET SW15.
8. When they connected, the following message
appears.
“Erase all data in this device ? (Y/N)”
9. Click the [Yes]. Data will be erased.
10. Click the [P] Button.
11. When programming is done you can see below
message. “R006 : Programming complated
successfully.”
12. After finished downloading, set up the position as
below and push the RESET SW15.
13. The SET must be working bellowed sequence.
14. After “Complete”, please set up the position as
below again and Push the RESET SW15.
SW14
SW13
SW12
SW11
This position is for HOST program download.
SW15
SW15
You can check program
with this number.
(This number for "FUNAI_SF1.s24")