42
3139 115 23842
English
IMPORTANT!
Make sure the FM and MW
antennas are connected.
Tuning to radio stations
1
Press
TUNER
on the remote (or press
SOURCE
control at the front panel) to
select “
FM
” or “
MW
”.
2
Press
3
/
4
briefly on the remote.
➜
The display panel will show "
SEARCH
"
until a radio station with sufficient signal
strength is found.
3
Repeat step
2
if necessary until you find
the desired radio station.
4
To tune to a weak station, press
1
/
2
briefly and repeatedly until an optimal
reception is found.
Helpful Hint:
– If the FM radio station is transmitting RDS
(Radio Data System) data, the RDS name
will be displayed and stored.
Tuner Operations
DVD system’s
display panel
Presetting radio stations
You can store up to 40 FM and 20 MW
preset radio stations in the memory.
Helpful Hints:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no valid frequency is detected during
Plug and Play,"
PLEASE CHECK FM
/
MW
ANTENNA
" appears.
Automatic tuning
Automatic tuning allows you to store all
available radio stations automatically.
1
AUTO INSTALL
..
2
1
For first time setup
, press
TUNER
.
➜
"
AUTO INSTALL PRESS PLAY
"
appears.
2
Press
PLAY
B
until "
INSTALL TUNER
"
appears on the display panel.
➜
The system will start searching from
FM band and followed by MW band.
All the available radio stations with strong
signal strength will be stored
automatically.
➜
Once complete, the last tuned radio
station will play.
001-051-hts5x-01-Eng50
17/05/05, 1:19 PM
42
