English
11
3139 115 23842
Basic Connections
(continued)
●
Turn on the DVD system and playback a
disc.
●
Select the same transmission frequency
channel for both the wireless transmitter
and receiver.
On the wireless transmitter:
●
Press and hold
SOUND
button on the
remote until the best frequency that
obtains optimal reception.
Helpful Hints:
– In case of sound distortion, select another
frequency for both the wireless transmitter and
receiver. The distortion could be the result of
interference caused by other equipment using
same frequency channel in your house or
neighborhood.
– Extend the antennas vertically to improve
the reception. Check the antennas are safely
positioned without obstructions.
Step 4: Wireless Receiver
system
L
R
Pb
Pr
Y
WIRELESS REAR
SPEAKER ANTENNA
WIRELESS REAR
SPEAKER ANTENNA
REAR L
REAR R
REAR L
REAR R
REAR L
REAR R
1
2
3
4
5
table stand
Wireless
Receiver
Built-in
Wireless
transmitter
To ensure quality sound production
and transmission:
●
Place both the wireless transmitter and
receiver at least 3 metres apart and off
the ground (recommended minimum
height of 30cm). Do not place them too
close to TV, AC power adaptor or any
radiation sources.
●
Also note that audio may be interrupted
due to the reflected waves when a
person crosses or approaches the space
between the transmitter and wireless
speaker.
●
Wireless transmission may be interfere
by other devices, e.g. microwave, cordless
telephone, etc.
●
Place the wireless receiver and antenna in
standing position (as shown
5
).
001-051-hts5x-01-Eng50
17/05/05, 1:18 PM
11
