49
The contents of the USB fl ash drive cannot
be read.
The USB fl ash drive format is not
•
compatible with this Home Theatre
System.
Drive is formatted with different fi le
•
system which is not supported by this
unit (e.g. NTFS).
Maximum size of memory supported is
•
160 GB.
No sound from the rear speakers and the
indicator on the wireless receiver blinks
continuously for more than one minute.
Ensure that all required connections are
•
connected and carry out the following
steps:
1) Press .
2) Press -
. A screen is displayed.
3) Press
1
, then press the
button within 5 seconds. ‘PAIRING
SUCCESS’ is displayed.
4) If ‘PAIRING FAIL’ is displayed, repeat
steps 1 to 3.
No sound from TV programme.
Connect an audio cable from the AUDIO
•
input on this Home Theatre System
to the AUDIO output on your TV.
Then press repeatedly to select the
corresponding audio input source.
No surround sound effect from the speakers.
Press
•
to select a correct
surround sound setting.
If the Home Theatre System does not
•
support DTS playback, press
to
select other audio track.
Ensure that the source you are playing
•
is recorded or broadcast in surround
sound (Dolby Digital, etc).Sound cannot
transmit through HDMI connection if
the connected device is non-HDCP
compliant or only DVI-compatible. Make
an analogue or digital audio connection.
Play
DivX video fi les cannot be played.
Ensure that the DivX fi le is encoded
•
according to the ‘Home Theatre Profi le’
with the DivX encoder.
Ensure that the DivX video fi le is
•
complete.
The aspect ratio of the screen is not aligned
with the TV display setting.
The aspect ratio is fi xed on the disc.
•
DivX subtitle does not display correctly.
Ensure that the subtitle fi le name is the
•
same as the movie fi le name.
Select the correct character set:
•
1) Press - .
2) Select
[Preferences]
, then press .
3) Select
[DivX Subtitle]
, then press
OK
.
4) Select the character set that supports
the subtitle.
EN
Tr
oubleshooting
English
