38
Note
You must turn on the HDMI CEC operations
•
on the TV/devices before you can enjoy the
EasyLink controls. See the TV/devices manual
for details.
Philips does not guarantee 100%
•
interoperability with all HDMI CEC compliant
devices.
[Disc Lock]
Sets play restriction for specifi c discs.
Before you start, place the disc in the disc
compartment (maximum 40 discs can be
locked).
•
[Lock]
– Restricts access to the current
disc. Once activated, a password is
needed to unlock and play the disc.
•
[Unlock]
– Plays all discs.
Tip
You can set or change the password (see
•
‘Adjust settings’ > ‘Preferences’ >
[Password]
).
[Display Dim]
Changes the brightness level of the display
panel on this Home Theatre System.
•
[100%]
– Normal brightness.
•
[70%]
– Medium brightness.
•
[40%]
– Dimmest display.
[OSD Language]
Selects the default on-screen menu language.
[Screen Saver]
Turns off or on the screen saver mode. Helps
to protect the TV screen from being damaged
due to over exposure to a static image for too
long.
•
[On]
– Sets the screen saver to appear
after 5 minutes of inactivity (for example,
in pause or stop mode).
•
[Off]
– Disable screen saver mode.
[EasyLink Setup]
If this Home Theatre System is connected
to HDMI CEC compliant TV/devices, all
connected devices can respond to the
following commands simultaneously:
Option
Description
[EasyLink]
Turns off or on all EasyLink
features.
To disable this feature, select
[Off]
.
[One
Touch
Play]
When you press
PLAY
, the
TV and Home Theatre System
are turned on. Disc play starts
if there is a disc in the Home
Theatre System.
To disable this feature, select
[Off]
.
[One
Touch
Standby]
If you press and hold
STANDBY
for at least 3 seconds, the Home
Theatre System and all the HDMI
CEC devices switch to standby
simultaneously.
To disable this feature, select
[Off]
.
[System
Audio
Control]
When you play audio that is
routed from the connected
devices, this Home Theatre
System switches to the
corresponding audio source
automatically.
To enable this feature, select
[On]
. Then proceed to
[Audio
Input Mapping]
to scan and map
all the connected devices.
[Audio
Input
Mapping]
When you map the audio
input correctly, this Home
Theatre System switches to the
audio from the played device
automatically.
EN
