48
Picture
No picture.
See TV manual for correct video input
•
channel selection. Change the TV channel
until you see the DVD screen.
Press
•
.
If you have changed the
•
[TV Display]
setting, switch back to default mode:
1) Press to open the disc compartment.
2) Press .
3) Press .
If you have changed the
•
[Progressive]
setting, switch back to default mode:
1) Press to open the disc compartment.
2) Press .
3) Press
.
No picture on HDMI connection.
Check if the HDMI cable is faulty. Replace
•
a new HDMI cable.
If this happens when you change the
•
HDMI video resolution, you have to
switch to its default mode:
1) Press .
2) Press .
3) Press
.
Sound
No sound.
Ensure that the audio cables are
•
connected and press the correct input
source (for example, ,
USB
) to select
the device you want to play.
No sound on HDMI connection.
Sound cannot transmit through HDMI
•
connection if the connected device is
non-HDCP compliant or only DVI-
compatible. Make an analogue or digital
audio connection.
Ensure that the
•
[HDMI Audio]
setting is
turned on.
11 Troubleshooting
Warning
Risk of electric shock. Never remove the
•
casing of the Home Theatre System.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using the
Home Theatre System, check the following
points before requesting service. If the problem
remains unsolved, register your Home Theatre
System and get support at www.philips.com/
welcome.
If you contact Philips, you will be asked for the
model and serial number of your Home Theatre
System. The model number and serial number
are on the back or underside of your Home
Theatre System. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this Home Theatre System do
not work.
Disconnect this Home Theatre System
•
from the power outlet for a few minutes,
then connect again.
EN
