English
EN
45
Tr
o
u
b
le
sh
o
o
ti
n
g
9 Troubleshooting
Main unit
The buttons on this unit do
not work.
Disconnect this unit from the power outlet for a few minutes,
then connect again.
•
Picture
No picture.
Refer to your TVs manual for correct video input channel
selection. Change the TV channel until you see the DVD screen.
Press
DISC
.
If this happens when you turn on the progressive scan setting or
change the TV type setting, you have to switch to its default
mode:
Press
Z
to open the disc compartment.
Press
b
.
Press
AUDIO SYNC
(for progressive scan) or
SUBTITLE
(for TV Type).
•
•
•
1.
2.
3.
No picture on HDMI
connection.
Check if the HDMI cable is faulty. Replace a new HDMI cable.
If this happens when you change the HDMI video resolution,
you have to switch to its default mode:
Press
Z
to open the disc compartment.
Press
b
.
Press
ZOOM
.
•
•
1.
2.
3.
Warning!
Risk of electric shock. Never remove the casing of
this unit.
•
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this unit, check the following
points before requesting service. If the problem remains unsolved,
register your product and get support at www.philips.com/welcome.
