Philips HTB5544D, Руководство пользователя

Страница: 34 / 57

34
EN
Note
•
AM and digital radio are not supported.
•
If no stereo signal is detected, you are prompted to
install the radio stations again.
1
Connect the FM antenna to the
FM
ANTENNA on your home theater.
• For the best reception, place the
antenna away from your TV or other
sources of radiation.
2
Press
RADIO
on the remote control to
switch to radio source.
»
If you have already installed the radio
stations, the last channel that you
listened to is played.
» If you have not installed any radio
stations, the message
AUTO
INSTALL...PRESS PLAY appears on
the display panel. Press (
Play
) to
install radio stations.
3
Use the remote control to listen or to
change radio stations.
Play buttons
Button Action
/
or
Alphanumeric
buttons
Select a preset radio station.
Navigation
buttons
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation
of radio stations.
BACK Press and hold to erase the
preset radio station.
OPTIONS
Manual:
1) Press OPTIONS . 2) Press
/ to select your preset.
3) Press
OPTIONS
again to
store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
SUBTITLE
Toggle between the stereo
and mono sounds.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz.
1
Press
RADIO
on the remote control to
switch to radio source.
2
Press .
3
Press and hold (
Play
) to toggle between
50 kHz or 100 kHz.
MP3 player
Connect a MP3 player to play audio files.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO-IN
connector on your home theater.
• If you use 6.5mm stereo audio cable,
connect the MP3 player to your
home theater using a 3.5mm - 6.5mm
converter jack.
2
Press SOURCE repeatedly until AUDIO-
IN
appears on the display panel.
3
Press the buttons on the MP3 player to
select and play audio files.
HTB5544D_F7_UM_V1.0.indb 34 2013/5/24 11:46:44