27
EN
4
Press the
Navigation buttons
and
OK
to select and change:
•
[Screen saver]
: Switch the home
theater to screen saver mode after
10 minutes of inactivity.
•
[Auto standby]
: Switch the home
theater to standby after 30 minutes
of inactivity. This timer works only
when a disc or USB play is paused
or stopped.
•
[Sleep timer]
: Set the duration of
the sleep timer so that the home
theater is switched to standby after
the specified period.
Speaker settings
1
Press (
Home
).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Advanced]
, and then press
OK
.
4
Press the
Navigation buttons
and
OK
to select and change:
•
[Enhanced audio]
: Select
[On]
to
enable audio post processing at
the speaker and enable karaoke
settings (if your product supports
Karaoke). To play the original audio
of the disc, select
[Off]
.
Tip
•
Enable audio post processing before
you select a predefined sound mode
(see 'Sound mode' on page 24).
Restore default settings
1
Press (
Home
).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Advanced]
>
[Restore default
settings]
, and then press
OK
.
4
Select
[OK]
, and then press
OK
to
confirm.
»
Your home theater is reset to its
default settings except for some
settings such as parental control
and DivX VOD registration code.
