16
9 Troubleshooting
This chapter summarizes the most common problems you could encounter with the appliance. If you
are unable to solve the problem with the information below, contact the Consumer Care Center in
your country.
Problem
Cause
Possible solution
The indicators do not
light up.
The power plug is connected
incorrectly.
Check whether the power plug is plugged
correctly.
The power button is not
pressed.
Press the power on/off button
(
)
.
After pressing the
start/pause button
(
)
the appliance
sounds but it does
not work.
The chamber is assembled
incorrectly.
Make sure you follow the user manual to
assemble all parts correctly.
The shaping disc, or the front
panel is assembled incorrectly.
The preferred servings is not
selected.
Make sure you have selected the servings
before pressing the start/pause button
(
)
.
During processing, the
appliance suddenly
stop, and then
suddenly restart again.
The safety switch
of the shaping disc
holder is triggered.
The front panel knob is
loosen.
Make sure the front panel is securely
assembled.
The ratio of the flour and
water is incorrect.
Follow the flour/water ratio table to measure
the amount of flour and water needed.
During processing, the
appliance stops. There
is no alarm sound or
flashes.
The noodle maker is overheat
due to long continuous
working time.
Disconnect from the power, and allow the
noodle maker to cool down.
The appliance stops
during processing,
then the indicators
are flashing quickly,
and the alarm sounds.
The mixing paddle can be
blocked by some foreign
objects.
Disconnect from the power, clean the noodle
maker, and follow the user manual again to
restart the noodle making.
The dough can be too dry.
The wrong program is
selected.
EN
Содержание HR2330
Страница 2: ......
Страница 35: ...35 12 保固與服務 如果您有任何問題 需要維修或資訊 請 參閱 www philips com support 或聯絡您當 地的 Philips 客戶服務中心 ZH TW ...