5
Quick start guide
ATTENTION!
WINDOWS 98SE
USERS:
TO AVOID INSTALLATION PROBLEMS, DO NOT CONNECT THE JUKEBOX
TO THE PC'S USB PORT UNTIL AFTER YOU COMPLETE STEP 1
.
Welcome to
Philips hdd100 Recording Audio Jukebox
.To get started,
follow the steps as shown.
Step 1 Software installation
●
Insert the installation CD-ROM into your CD-ROM drive.
Digital Media
Manager
(DMM) is necessary for music file transfer and will be installed
automatically for first time users.
Step 2 Charging
●
Connect the supplied multi-voltage adapter/charger to the 5V
DC jack on your hdd100 and your power supply. Charge your
Jukebox for approx. 4 hours.
Step 3 Connect your hdd100 and PC
●
Connect your hdd100 to your PC using the supplied USB
2.0 cable.You can do this while the hdd100 is still charging.
TIP:
– Make sure your hdd100 is powered by the supplied power adapter when connecting
to your computer, in case battery power is low or needs charging.
Step 4 Transfer your music and enjoy
●
Before you fill in your details to register for the
Digital
Media Manager
(DMM), please read the DMM user
manual to enable you to manage and transfer your music.
TIP:
– Manage (transfer, delete, etc.) your files only through DMM to avoid problems!
– If your Jukebox appears to hang up or the controls do not respond, press
VOLUME
+
and
5
,
4
simultaneously for 2 seconds to reset.Then press
POWER
2;
for 1
second to switch on again. (File content e.g. your songs, recordings or downloaded
files on your Jukebox is not affected when resetting in this way.)
HDD100_ENG 19/8/03 16:31 Page 5