Philips Gold Series, Руководство пользователя

Страница: 52 / 91

4.8 Software
Current version
To view the current TV software version, press
h
> Setup >
Software settings and press OK . Select Current software info
: and read Version
Update from Internet
If the TV is connected to the Internet, you may receive a
message from Philips to update the TV software. You need a
.high-speed (broadband) Internet connection
If you receive this message, we recommend you carry out the
.update. Select Update . Follow the instructions on screen
You can also look for new updates yourself. To look for an
update, press
h
>
Setup
>
Update software
and press
OK
.
.Follow the instructions on screen
When the update is complete, the TV switches off and back on
again automatically. Wait for the TV to switch itself back on. Do
.not use the Power switch
O
on the TV
Update with USB
It might be necessary to update the TV software. You need a PC
with an high-speed Internet connection and a USB memory
device to upload the software on the TV. Use a USB memory
device with 256MB free space. Make sure that write protection is
.switched off
Start 1
Identify 2
Download 3
Update TV 4
Start the update on TV 1
To start the software update, press
h
>
Setup
>
Update
.
software
. Select
USB
Identify the TV 2
Insert the USB memory into the side of the TV, select
Start
and
press
OK
. An identification file is written on the USB memory
.device
Download the TV software 3
Insert the USB memory into your PC. On the USB memory
device, locate the file
update.htm
and double click it. Click on
Send ID
. If new software is available, download the .zip file. After
the download, unzip the file and copy the file
autorun.upg
onto
.the USB memory device. Do not place this file in a folder
Update the TV software 4
Insert the USB memory into the TV again. The update starts
automatically. The TV switches itself off for 10 seconds and then
.back on again. Please wait
. . . Do not
use the remote control •
remove the USB memory device from the TV •
If a power cut occurs during the update, never remove the USB
memory device from the TV. When the power returns, the
.update will continue
At the end of the update, the message
Operation succesful
appears on screen. Remove the USB memory device and press
.
O
on the remote control
. . . Do not
press
O
twice •
use the
O
switch on the TV •
The TV switches itself off (for 10 seconds) and then back on
.again. Please wait
.The TV software has been updated. You can use the TV again
To prevent an accidental update of the TV software, delete the
.autorun.upg file from the USB memory device
52 Setup / Software