Philips GC500 Series, Инструкция по эксплуатации

Страница: 10 / 56

3 Tilt the appliance to an angle of approx. 45° and empty the water tank into the sink. Make
sure there is no more water flowing out of the drainage hole.
4 Repeat steps 1, 2 and 3.
5 Turn the cap of the drainage opening to the ‘locked’ position.
Replacement
You can order the following items from a Philips service centre:
- steamer head holder
- filling cup
- glove
- hanging accessory
Environment
- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 22).
Guarantee and service
If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country. You find its phone
number in the worldwide guarantee leaflet. If there is no Consumer Care Centre in your country,
go to your local Philips dealer.
Troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem Possible cause Solution
The appliance does
not heat up.
There is a connection problem. Check the mains plug and the wall
socket.
You have not switched on the
appliance.
Press the on/off button to switch on
the appliance.
The appliance does
not produce any
steam.
The steamer has not heated up
sufficiently.
Let the appliance heat up for approx.
2 minutes.
Steam has condensed in the hose. Lift the steamer head to straighten
the hose. This allows any
condensation to flow back into the
water tank.
The water level is below the MIN
level indication.
Fill water tank to the MAX level
indication.
You have placed the steamer on a
table or chair instead of on the
floor.
Place the steamer on the floor.
EnGliSh
10