8
English
Preparations
Rear connections
The type plate is located at the rear of the
system.
A
Power
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
– If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR to the
local power line voltage.
Warning!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it
(not available for all versions).
B
Antennas Connection
Connect the supplied MW loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
MW Antenna
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
R L
FM ANTENNA
SUBWOOFER 6
Ω
LOW CHANNEL 3
Ω
AC
MAINS
VOLTAGE
SELECTOR
NOT FOR ALL
VERSIONS
110V-
127V
220V-
240
HIGH CHANNEL
+
C
+
R L
+
AM ANTENNA
AUX/
CDR
IN
LINE
OUT
+
R
L
+
B
Subwoofer
pg001-pg028_FWM583-55-Eng
2007.7.6, 17:14
8
