28
English
“
DEVICE NOT SUPPORTED
” scrolls on the
display.
Radio reception is poor.
The system does not react when buttons
are pressed.
Sound cannot be heard or is of poor
quality.
The left and right sound outputs are
reversed.
The remote control does not function
properly.
The time is not working.
Not all lighted buttons are showing light.
The Clock/Timer setting is erased.
The system displays features
automatically and buttons start flashing.
✔
Remove the USB mass storage device or select
another source.
✔
If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
✔
Increase the distance between the Mini HiFi
System and your TV or VCR.
✔
Remove and reconnect the AC power plug and
switch on the system again.
✔
Adjust the volume.
✔
Disconnect the headphones.
✔
Check that the speakers are connec ted
correctly.
✔
Check if the stripped speaker wire is clamped.
✔
Make sure the MP3-CD was recorded within
32-256 kbps bit rate with sampling frequencies
at 48 kHz, 44.1 kHz or 32 kHz.
✔
Check the speaker connections and location.
✔
Select the source (CD or TUNER, for example)
before pressing the function button (
ÉÅ
).
✔
Reduce the distance between the remote
control and the system.
✔
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
✔
Replace the batteries.
✔
Point the remote control directly towards the IR
sensor.
✔
Set the clock correctly.
✔
Press and hold
CLOCK
•
TIMER
to switch on
the timer.
✔
If recording is in progress, stop recording.
✔
Press
DIM
to select DIM OFF display mode.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔
Press and hold
9
on the system to switch off
the demonstration.
Troubleshooting
pg001-pg028_FWM583-55-Eng
2007.7.6, 17:14
28
