Philips FWM583, Руководство пользователя

Страница: 25 / 29

English
25
Clock/Timer
Timer setting
The system can switch on to CD, TUNER, or
USB mode automatically at a preset time,
serving as an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is
in progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
1
In standby mode, press and hold
CLOCK•TIMER
for more than two seconds
to select timer mode.
➜
The last timer setting star ts flashing.
➜
The selected source will be lighted and
flashing.
2
Press
CD
,
TUNER
or
USB
to select the
desired source.
●
Before setting timer, make sure the music source
has been prepared.
CD
– Load the disc(s). To start from a specific
track, make a programme (refer to “CD
Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station.
3
Press ALBUM -/+
5 6
repeatedly to set the
hour for the timer to start.
4
Press TITLE -/+
¡
/
™
repeatedly to set the
minute for the timer to start.
5
Press CLOCK•TIMER to store the star t time.
●
At the preset time, the selected source will play.
To exit without storing the setting
●
Press STOP
9
on the system.
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 10 seconds, the system will exit timer setting
mode automatically.
To deactivate the TIMER
●
Press
SLEEP/TIMER
on the remote control.
➜
The display will show "
OFF
" and
TIMER
will
disappear from the display.
To activate the TIMER
●
Press
SLEEP/TIMER
on the remote control.
➜
The last set timer information will be shown
for a few seconds and
TIMER
will appear on the
display.
Sleep timer setting
The sleep timer enables the system to switch to
standby mode automatically at a preset time.
1
In active mode, press SLEEP/TIMER on the
remote control repeatedly to select a preset
time.
➜
The selections are as follows (time in
minutes):
15
™
30
™
45
™
60
™
90
™
120
™
OFF
™
15
…
➜
"
SLEEP XX
" or "
SLEEP OFF
" is displayed.
"
XX
" is the time in minutes.
2
When you reach the desired length of time, stop
pressing the
SLEEP/TIMER button.
➜
SLEEP
is shown, except for "
SLEEP OFF
"
mode.
To check the remaining length of time
after sleep timer is activated
●
Press
SLEEP/TIMER
once.
To change the preset sleep timer
●
Press SLEEP/TIMER again while the remaining
sleep timer is shown.
➜
The display will show the next sleep timer
options.
To deactivate the sleep timer
●
Press
SLEEP/TIMER
repeatedly until "
SLEEP
OFF
" is displayed, or press
STANDBY ON
B
.
pg001-pg028_FWM583-55-Eng 2007.7.6, 17:14 25