background image

English

11

Controls

Notes for remote control:
– First, select the source you wish to control
by pressing one of the source select keys on
the remote control (CD or TUNER, for
example).
– Then select the desired function (

É

í

,

ë

, for example).

Hearing Safety

Listen at a moderate volume.

Using headphones at a high volume can impair
your hearing.  This product can produce sounds
in decibel ranges that may cause hearing loss for
a normal person, even for exposure less than a
minute.  The higher decibel ranges are offered
for those that may have already experienced
some hearing loss.

Sound can be deceiving.  Over time your hearing
"comfort level" adapts to higher volumes of
sound.  So after prolonged listening, what sounds
"normal" can actually be loud and harmful to
your hearing.  To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.

To establish a safe volume level:

Set your volume control at a low setting.

Slowly increase the sound until you can hear it
comfortably and clearly, without distor tion.

Listen for reasonable periods of time:

Prolonged exposure to sound, even at normally
"safe" levels, can also cause hearing loss.

Be sure to use your equipment reasonably and
take appropriate breaks.

Be sure to observe the following
guidelines when using your headphones.

Listen at reasonable volumes for reasonable
periods of time.

Be careful not to adjust the volume as your
hearing adapts.

Do not turn up the volume so high that you
can't hear what's around you.

You should use caution or temporarily
discontinue use in potentially hazardous
situations.

Do not use headphones while operating a
motorized vehicle, cycling, skateboarding, etc.; it may
create a traffic hazard and is illegal in many areas.

*

USB DELETE

to delete music stored on the external USB
device.

(

Disc tray

)

OPEN•CLOSE

to open or close the disc tray.

¡

DISC CHANGE

to change disc(s).

Display screen

to view the current status of the system.

£

SLEEP/TIMER

to activate/deactivate or set the sleep timer.

MUTE

to mute or restore the volume.

NUMERIC KEYS

to input numbers.

§

DISPLAY

to display the album and title name for MP3 disc.

ECHO

to adjust the echo level.

MIC VOLUME

to adjust the mixing level for Karaoke.

ª

CLOCK•TIMER

to view the clock.

to set the clock or set the timer.

º

USB DIRECT 

jack for the external USB mass storage device.

pg001-pg028_FWM583-55-Eng

2007.7.6, 17:14

11

Содержание FWM583






























Отзывы: