Philips FW 910SR, Руководство пользователя

Страница: 26 / 31

26
English
RECORDING
Notes:
– For recording, use only tape of IEC type I
(normal tape) or IEC type II (Chrome).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of VOLUME,
DBB or Incredible Surround.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side that you want to protect.
– If "
CHECK TAPE
" is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Chrome
tape
detection hole when covering the tab
opening.
One Touch Recording
• For One Touch Recording, as soon as you
press RECORD , the current source will
be recorded on tape deck 2.
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
™ REC flag starts flashing.
3 Press STOP
Ç
to stop recording.
Note:
– When you press RECORD at TAPE mode,
“
SELECT OTHER SOURCE
” will be
displayed. One Touch Recording is not
possible at TAPE mode.
MW AM
STEREO
FM PM LW
TIMER
SHUFFLE REPEAT
PROGRAM
REPLAY
MAX
NEWS
CD TUNER TAPE AUX
STANDBY.ON
CD 1 • 2 • 3 BAND TAPE 1 • 2 VIDEO
n
TIMER
CLOCK
PROGRAM
RDS NEWS!
DEMO TUNING
▲ ▲ ▲ ▲
STOP•CLEAR
SEARCH
PLAY PAUSE
PREV NEXT
PRESET
▲
▲
I S
DBB REC
HSD
DUBBING
NORM•FAST RECORD A. REPLAY
MASTER VOLUME
OPTIMAL
DBB
JAZZ
TECHNO ROCK
DIGITAL SOUND CONTROL
DSC
OPEN OPEN
TAPE 1 TAPE 2
OPEN OPEN
INCREDIBLE SURROUND
Dubbing tapes
(from tape deck 1 to
tape deck 2)
1 Press TAPE to select tape deck 2 .
2 Load the prerecorded tape into tape
deck 1 and a blank tape into tape deck
2.
™ Make sure that the tape in tape deck
1 has its full spool to the left.
3 Press DUBBING once for normal
speed dubbing or twice within 2
seconds for high speed dubbing.
™ "
NORMAL
" (normal speed) or
"
FAST
" (high speed) will be
displayed and then followed by
"
DUBBING
".
™ HSD flag appears on the display for
high speed dubbing.
• Dubbing will start immediately.
™ REC flag starts flashing.
4 Press STOP
Ç
to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
– During high speed dubbing in Tape
mode, the sound is reduced to a low
volume.
– You can switch to other source while
dubbing.