Philips FW 910SR, Руководство пользователя

Страница: 17 / 31

17
English
MEMORY EMPTY
…when REVIEW is
selected while no text
is in memory.
AUTO TRACK
.... when selecting auto
track increment ON or
OFF.
ON
......................... Auto Track increment
on.
OFF
...................... Auto Track increment
off.
NO TEXT
............ no text stored for disc.
Switching the system ON
1 Plug the power cord supplied into the
MAINS connector on the CD recorder,
then into a mains socket.
2 Press ON/OFF .
™ The recorder is now in Standby
mode.
3 Press any key to activate the recorder.
Notes:
– The CD recorder will automatically
adjust to the local mains voltage.
– When the CD recorder is in the 'OFF'
position, it is still consuming some
power. If you wish to disconnect your
player completely from the mains,
withdraw the plug from the AC outlet.
Inserting discs
1 Press OPEN/CLOSE to open the disc
tray.
2 Insert a CD, CDR or CDRW in the
appropriate recess in the tray, label side
up.
3 Press OPEN/CLOSE to close the tray.
™ “
CLOSE
“ lights up, followed by
“
READING
“ and the type of disc you
inserted appears on the display.
• If a CDR(W) is finalized it will show
CD
on the display.
• If CD-text is available the TITLE/ARTIST
will scroll by.
Notes:
– Only Audio CDs will be accepted. If a
non-audio disc is inserted, the display
shows "
WRONG DISC
" .
– If you insert a blank or partly-recorded
CDR or unfinalized CDRW, the CD
recorder will calibrate the disc for
optimum recording. During this process
the display will first show
"
INITIALIZING
" and then the
number of audio tracks. Calibration can
take up to 25 seconds.
Recording
Important:
– If you want to play the recorded
CDR disc on any regular CD player,
it must first be finalized. See
finalizing discs.
– Finalized CDRW discs play only on
CDRW compatible CD players.
– For recording from CD-changers, do
not use Manual Recording.
– Only make analog recordings when
digital recording is not possible.
– If the disc already contains
recordings, the CD recorder will
automatically search for the end of
the last track, so that recording can
start from there.
– There must be at least 7 seconds of
recording time left on the disc,
otherwise you will not be able to
enter record standby mode. "
DISC
FULL
" then lights up.
– A maximum of 99 tracks can be
recorded on a disc. Minimum
allowable track length is 4 seconds.
AUTOSTART RECORDING
This feature enables you to make fast and
easy recordings of a CD. Track increments
are automatically detected from the source
material. Track increments cannot be added
manually. In analog source material a
silence of 2.7 seconds or more is
automatically detected as a track
increment.
Preparing for autostart recording
1
Make sure the disc is absolutely free of
scratches and dust particles.
2 Press SOURCE repeatedly to select
DIGITAL, OPTICAL or ANALOG mode.
™ The
DIGITAL I
,
OPTICAL I
or
ANALOG
flag
lights up.
™ “
DIGITAL 1
,
OPTICAL
or
ANALOG
” appears on the display.
3 Press REC TYPE once to record a
complete disc; or
twice
to record a
single track; or four times to record a
complete disc with Auto-Finalize
function selected.
™ The
SYNC
flag starts flashing.
™ “
RECORD DISC
,
RECORD
TRACK
or
MAKE CD
” appears on
the display.
Start autostart recording
1
Start playback on the selected source.
™ The CD recorder automatically starts
to record.
• To check the elapsed recording time,
press DISPLAY .
• The recorder will stop automatically at
the end of recording.
2 To stop recording manually, press STOP
Ç
on the CD Recorder.
™ The
SYNC
flag disappear and the
display shows “
WAIT
” .
• If STOP
Ç
was pressed within 3
seconds after starting playback, no
recording will take place.
CD RECORDER