background image

2

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in

accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers)
that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and third grounding prong.The wide blade or third
prong are provided for your safety.When the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12.

Use only with a cart, stand, tripod, bracket, or 
table specified by the manufacturer, or sold with 
the apparatus.When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury
from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

15. This product may contain lead or mercury. Disposal of these

materials may be regulated due to environmental
considerations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
Alliance: www.eiae.org.

16.

Damage Requiring Service

- The appliance should be

serviced by qualified service personnel when:

A

.

The power supply cord or the plug has been damaged;
or

B.

Objects have fallen, or liquid has been spilled into the 

appliance; or

C.

The appliance has been exposed to rain; or

D.

The appliance does not appear to operate normally or
exhibits a marked change in performance; or

E.

The appliance has been dropped, or the enclosure
damaged.

17.

Tilt/Stability

- All televisions must comply with

recommended international global safety standards for tilt
and stability properties of its cabinets design.
• 

Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet
which could ultimately overturn the product.

Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet.
Such items could unsuspectingly fall from the top of
the set and cause product damage and/or personal
injury.

18.

Wall Mounting

- The appliance should be mounted to a

wall only as recommended by the manufacturer.

19.

Power Lines

- An outdoor antenna should be located away

from power lines.

20.

Outdoor Antenna  Grounding

- If an outside antenna is

connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No.
70-1984, provides information with respect to proper
grounding of the mats and supporting structure grounding
of the lead-in wire to an antenna-discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes and requirements for
the grounding electrode. See Figure below.

21.

Objects and Liquid Entry

- Care should be taken so that

objects do not fall and liquids are not spilled into the
enclosure through openings.

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips reprensatives can
help you get the most from your new product by explaining:
• Hookups
• First Time Setup, and
• Feature Operation.

For fast help, call us first !

1-800-531-0039

Thank you for making Philips a part of your home!

2268.1 am  03-12-2003  09:47  Pagina 2

Содержание FlatTV Matchline 50FD9955

























Отзывы: